5m - 30m Full Automatic Lift

Installation Steps:

1. Prepare the Equipment:

• Ensure you have the Ground Swap LED light, the telescopic pole, and the specialized mechanical device.

2. Adjust the Telescopic Pole:

• Adjust the telescopic pole to the desired height for the LED light installation.

3. Attach the Mechanical Device:

• Secure the specialized mechanical device to the top of the telescopic pole.

4. Engage the Safety Lock:

• Pull the rope or controller to retract the safety lock clip on the mechanical device.

5. Insert the Device:

• Insert the top end of the device into the LED light's recess.

6. Secure the Light:

• Release the rope or controller to allow the safety lock clip to extend into recess.

• Ensure the lock clip interferes in the XYZ directions within the recess.

7. Fasten the Light:

• Rotate the device clockwise to screw the LED light into place securely.

Maintenance Steps:

1.  Remove the Light:

• Rotate the device counterclockwise to unscrew the LED light.

2. Ensure Safety:

• Verify that the safety lock clip is still retracted to prevent accidental falls during the process.

3. Detach the Device:

• Carefully detach the mechanical device from the LED light by ensuring the lock clip is completely retracted.

4. Lower the Telescopic Pole:

• Adjust the telescopic pole to bring it back to a manageable height for storage or further maintenance.

5. Store Equipment:

• Safely store the telescopic pole and the mechanical device for future use.